-
Sale!
SLAVE tool, works in conjunction with a linked Master. This tool uses an annual subscription model for updates, support and online services. The first year is included, value 1100 CHF. A valid subscription is mandatory for use.
- OBD K-Line, CANBUS, DoIP ENET
- VAG FRF/ODX/SGO flasher
- BOOT/BENCH Interface for all supported processors ST10,C167,RENESAS,TRICORE,TC29x,MPC5777.
- Motorola BDM - MPC5xx
- Read and write encrypted SLAVE files
- High current Power supply suitable for BOOT, BENCH and BDM
- One year free subscription
- NEW! Unrestricted slave option allows user to work any master (At additional cost, see product options)
-
Sale!
MASTER tool, reads/writes files in .HPT format, compatible with VCM Editor. VCM Scanner - Diagnostic and advanced real time data logger tool, which is completely free! VCM Editor - Flash tool and editor functions operate on a credit based licensing system.
Credits are used as currency to purchase licenses for the different modules and licensing a module gives you the ability to tune it. The number of credits necessary to purchase a license varies depending on the vehicle. You can find a complete list of supported vehicles and credit costs here. -
Promo KESS3!
MASTER tool, reads/writes open BIN files. This tool uses an annual subscription model for updates, support and online services. The first year is included, value 1300 euros. A valid subscription is not mandatory for use, however services which require subscription will not be available. -
Promo KESS3!
SLAVE tool, works in conjunction with a linked Master. This tool uses an annual subscription model for updates, support and online services. The first year is included, value 600 euros. A valid subscription is not mandatory for use, however services which require subscription will not be available. -
Sale!
- BRAND NEW, limited supply...surplus stock to clear!
- 2 year warranty included
- OBD and TRICORE BOOTLOADER mode
- Supports engine & gearbox controllers
- TCU CLONING functions
- AUTOMATIC CHECKSUM correction
- RECOVERY capabilities in the event of unforeseen errors
- BOSCH UNLOCK Plugin MAGP1.18 included
- BMW Fxx ENET Cable for MAGPro2 X17 included
-
Sale!
MAGICMOTORSPORT FLEX Master tool with FULL activations
MASTER tool, reads/writes open BIN files. This tool uses an annual subscription model for updates, support and online services. The first year is included, value 800 euros. A valid subscription is mandatory for use. -
Scope of delivery:- Scanmatik SM2-PRO interface
- 16 pin OBD2 cable
- 12V cigar lighter power cable
- Carry case
- Software and drivers package (download)
- USB cable
-
Sale!
Will fit KESS v2 and MAGPro2 Base tools! -
Sale!
Limited offer, while stocks last!
Suitable for VW Audi Seat Skoda Fiat Opel vehicles, a multifunction Tacho/Immobiliser/Key Coding tool.
- Support for VDO dashboards for Audi A1,Q3, VW, Skoda, Seat MY2009 - 2016 with NEC mcu and 24C32 or 24C64 eeprom.
- Mileage change for Magnetti Marelli dashboards with NEC and 95320 eeprom! ONLY via OBD! Without disassembly of instrument panel. Supports NEC MCU with 256 kB, 512 kB and 1MB flash memory.
- NEW Super Rapid key programming feature for VAG cars with VDO and Magnetti Marelli dashboards on CAN bus! ( TP2 and UDS protocols )
- Support for older VDO dashboards for VW Polo, Skoda Fabia,Roomster MY2006-2009 K-Line via BCM - KW1281 protocol.
- Support for Magnetti Marelli MM5/7/9 dashboards for VW from years 2009-2013 with NEC + 95320 eeprom, or 9S12 MCU .CAN bus - UDS protocol. Full support for VW Up, Skoda Citigo, Seat Mii with Marelli 9S12 dash MY2010+.
- Full Support for brasillian VDO dashboards of VW Fox, SAVEIRO, POINTER, ect . from year 2011 + with NEC D70F3422 mcu and 24C32 eeprom. Communication via K-Line - KWP2000 protocol.
- PIN code and CS data reading, Key programming via OBD for VW cars: GOL, FOX, SAVEIRO G5 from years 2009 - 2013 . 9S12 MCU with , or without external eeprom . Pre-programming with CS data of the new transponder keys for these cars when there is no valid key of the car! Communication via K-Line - KWP2000 protocol.
- PIN code and key data reading, key programming for Fiat cars with Delphi BCM MY2007-2017
- Supported Delphi BCM: NEC3237,3379,3556,3557,3633 with dataflash or external eeprom!
- Supported FIAT cars: Grande Punto, Doblo, 500, Panda, Qubo, Fiorino with Hitag2 transponder keys
- 500X, Tipo (Egea) with Megamos ID88 remotes MY2015-2017
- Key programming for Opel cars with Immo1,2 and Immo3 (CAN bus) up to year 2009
- Pin code reading from engine ecu of some Opel cars with Immo2. Program/erase keys of immo1,2 and 3. Pin code is required! Clear engine ecu, adaptation of virgin ecu to Immo2. Clear immo2, immo3, adaptation of virgin Immo2 to engine ecu.
- Built-In programmer for Megamos ID48, ID88, and Hitag2 transponder chips or remotes
